New K5.3 Low Pressure Pneumatic Clamping Module
Zero-point clamping system for set-up-time-optimized clamping. The compact size makes it ideal for light duty machining applications as well as non-machining applications like assembly fixtures and test stands.
- Low Pressure (min 5 bar / 72 psi)
- Single Acting Modules
- Hardened Stainless Steel
- Pneumatic Unlocking
- Cover and piston hardened
- Repeatability < 0.005mm (0.0002")
- DOWNLOAD ZPS Operating Manual
- Related Products and Accessories
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
|K5.3||1.5/ (330)||13/ (2900)||72 psi (5 bar)||Yes||78||15||54.5||29||8||62||M4||21||0.5|| |
All linear dimensions in (mm) Note: The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free). The clamping module with blow-out and support control has two connections: 1x pneum. opening (1), 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.) * Please observe the installation instructions.